Extech Instruments AN100 Manual

next previous

AN100-en-GB_V3.5 6/15

BatteryReplacement

WhenappearsontheLCD,the9Vbatterymustbereplaced.

1. Disconnectthesensor.

2. Removethemeter’srubberprotectivejacket

3. UseaPhillipsscrewdrivertoopentherearbatterycompartment

4. Replacethe9Vbattery

5. Closethebatterycompartmentandreplacethemeter’sprotectivejacket



You, as the end user, are legally bound (EU Battery ordinance) to return all used

batteries, disposal in the household garbage is prohibited! You can hand over your

used batteries / accumulators at collection points in your community or wherever batteries

/ accumulators are sold!

Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the

end of its lifecycle



WARNING:Toavoidelectricshock,donotoperatethemeteruntilthebatterycoverisinplace

andfastenedsecurely.

