Getting Started 15
R4CC810
User’s Guide Rev. E
GET.FM A5 size
8/29/03
R
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
T. Takahashi
S. Halvorson
2
2
2
2
2
2
2
2
2
2
1. Remove the connector cover.
2. Connect the AC adapter to PhotoPC P-1000 and a
power outlet as shown below.
c
Caution:
Do not connect the AC adapter when the battery is
not installed. Doing so may cause PhotoPC P-1000
to be damaged.
The CHARGE light flashes during charging. When the
battery is fully charged, the CHARGE light turns off.
It takes about 3.5 hours to fully charge the battery.
Setting and removing a memory card
This section describes how to set a memory card. See
“Available types of memory cards” on page 16 for the
types of memory cards that can be used.
c
Caution:
❏ To use a memory card correctly, read manuals
provided with the memory card. When using
other devices with a memory card, read manuals
provided with those devices also.
❏ Never remove a memory card while the
ACCESS light is on. Doing so may cause data
in the card or HDD to be lost or damaged.
❏ Avoid using or storing the card in direct
sunlight, or in places that are extremely hot,
humid, or dusty.
connector cover
