6 Introduction
L
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
T. Takahashi
S. Halvorson
R4CC810
User’s Guide Rev. E
INTRO.FM A5 size
8/29/03
❏ Avoid using outlets on the same circuit as
photocopies or air control systems that regularly
switch on and off.
❏ Position this product’s power cord so that it will
not be stepped on or run over.
❏ Do not place any objects on the power cord and
the AC adapter.
❏ Keep the power cord straight at the ends and at
the points where it enters the transformer.
❏ The power cord should be placed to avoid
abrasions, cuts, fraying, crimping, kinking, and
other damage.
❏ If you cannot insert the plug into the power outlet,
contact an electrician.
For US and Canadian users:
Use the included power cord or a 6 to 10 foot
UL-approved type SPT-2 or heavier type, 2 X 18 AWG
cord with a 125 V 10 A plug and 125 V 7 A connector.
When using a memory card
❏ Only memory cards designed for the product’s
specifications can be used.
❏ The methods for using memory cards vary
according to card type. Be sure to refer to the
documentation included with your memory card
for details.
❏ Do not remove a memory card or turn off the
product while the ACCESS light is flashing.
When using the LCD
❏ The LCD panel on this product may contain a few
small bright or dark spots. These are normal and
do not mean that your LCD panel is damaged in
any way.
❏ If the LCD panel on this product is damaged,
consult your dealer.
