54 EpsonNet WinAssist Configuration Utility
R4CB110
User’s Guide Rev.C
EPWIN.fm A5 size
8/21/03
L
Proof Sign-off:
KOW M. Arai H. Tomizawa
K. Nishi
NOC K. Lee
Note:
❏ If you try to add an incorrect network address, the “The network
address XXX.XXX.XXX.XXX that you entered will be added to
the list as XXX.XXX.XXX.X. Add this address?” message appears.
Check the correct network address and then click OK to add it.
❏ If you try to add the same network address, the “This network
address has already been registered” message appears, which
indicates this address cannot be added.
Search Options-IPX
When you manage the print server with IPX (NetWare), and when
you want to configure the print server outside of the local
network, set the network address of the print server. Select
Refresh from the View menu or restart EpsonNet WinAssist for
the settings to take effect.
Add button Registers a network address (up to 20 addresses).
Do not add the network address if it is in the same
segment.
Remove button Removes a network address and its subnet mask
from the List box.
