A
Technical Specifications
A-3
c
Caution:
Only load paper sizes that are listed above.
Printable area: 5mm minimum margin on all sides
Note:
Printable area varies according on the emulation mode.
Printer
General
Printing method: Laser beam scanning and dry electrophoto-
graphic process
Resolution: 300 or 600 dpi
Printing speed: Up to 20 pages per minute depending on the font
and data quantity
First print: Less than 11.5 seconds with A4/letter
Paper feed: Automatic or manual feed
Paper feed alignment: Center alignment for all sizes
Input paper supply
(75 g/m
2
paper):
Up to 150 sheets in the MP tray
Up to 20 envelopes, depending on thickness
Up to 250/500 sheets each in the lower paper
trays (Up to two lower paper trays can be
installed.)
Paper eject: Face down
Paper eject capacity
(75 g/m
2
paper):
Face down 250 sheets
Internal emulation: HP LaserJet 4 emulation (LJ4 mode)
HP-GL/2 emulations (GL2 mode)
ESC/P 24-pin printer emulation
(ESC/P2 mode)
ESC/P 9-pin printer emulation (FX mode)
IBM Proprinter emulation (I239X mode)
Optional emulation: EPSON Script 3
Resident fonts: 45 scalable fonts, and one bitmap font
(in LJ4 mode)
RAM: 8MB, expandable up to 256MB
