Product Descriptions
Rev. A
1-2
1.5.2 Default Setting
Default setting mode enables users to change the default settings (initialization values). The set values
are stored in the EEPROM and are not lost after the printer is turned off. To reset the values to the factory
values, perform EEPROM reset operation or use the adjustment program described in Chapter 4.
1.5.2.1 Setting Method
See Figure 1-11 for the default setting method.
Be sure to turn the printer off after the default setting operation is executed, since adjustment
values are not stored in the EEPROM until the printer is turned off.
The latest values set before power-off are stored in the EEPROM.
NO
YES
NO
Start
YES
Turn the printer off to save the new settings into the EEPROM.
1.Move through the languages listed
by pressing the "Micro Adjust "
button.
2.Set the language by pressing the
"Pause" button.
Press the "Media Type" button
while turning on the printer.
The printer prints how to select the
language for "Usage of this mode"
and firmware version number.
The printer prints the current
setting and "Usage of this mode"
in the selected language on the
currently loaded paper.
Change the settings?
More change?
1. Select the menu by pressing the
"Micro Adjust " button.
2. Select the value for the selected menu
by pressing the "Media Type" button
Figure 1-11. Default Setting Flowchart
CAUTION
