EPSON Stylus COLOR 3000
Rev. A
5-
Table 5-3. LED Error Status and Solutions
Printer Status Power Pause
Paper
Out
Ink
End
Media
Type
Solution
Power on On
Data proceeding Blinks
Paper Out
On
After loading paper, press the
Pause button and then press
the Load/Eject button.
Paper Jam
Blinks
After removing paper, press the
Pause button and then press
the Load/Eject button.
Print ready
On
During ink sequence
Blinks
No cartridge or ink
end
On *
1
Replace the ink cartridge.
Ink low
B*
1
Have a new cartridge ready.
Fatal error Blinks
Turn off and back on the printer.
Release lever error
Blinks
Set the lever back to the
previous position and eject the
loaded paper. Then set the lever
to the appropriate position for
the selected type of paper.
Maintenance
requested
Blinks Blinks Blinks On*
2
Blinks
Replace the waste ink drain
pads and perform
reset. (See Section 1.4.3 and
Section 3.2.9.)
Reset
Timer reset,
Clear
All go on for 1 second.
∗1: Corresponding Ink End LED indicator goes on.
∗2: All Ink End LED indicators go on.
