A SERVICE OF

logo

Open as PDF
next previous
85
E
The horizontal position of the left-hand headlight can be
adjusted by means of the adjuster screw (1, fig. 70) located
behind the headlight. Turn the screw clockwise and the
beam will shift to the right; turning the screw anti-clockwise
will shift the beam to the left.
The vertical position of the left-hand headlight can be
adjusted by means of the adjuster screw (2, fig. 70)
located behind the headlight. Turn the screw clockwise to
lower the beam or anti-clockwise to raise it.
Repeat the above procedure to adjust the right-hand
headlamp.
Rearview mirror adjustment (fig. 71)
The rearview mirror is adjusted manually by applying
pressure at point (A).
1
2
fig. 70
A
fig. 71