30
E
Erase USB
This function is used to erase all the data stored on the data
acquisition USB (not supplied as standard with this model,
but available for purchase from the Ducati sales network):
the DAQ must be connected to the motorcycle wiring.
To delete the data, enter the menu and select the “Erase
USB” page.
If you hold the switch (1, fig. 8) in position B “▼“ for
3 seconds and the USB DAQ is not acquiring data, the
message “WAIT…” appears on the display for 10 seconds.
After 10 seconds, the message “OK” appears for 2 seconds,
to confirm that the data has been deleted.
If you hold the switch (1, fig. 8) in position B “▼“ for
3 seconds and the USB DAQ is acquiring data, the DAQ
memory is not cleared and the display shows the message
“ERASE FAIL” for 2 seconds.
B = On 3 sec.
WAIT of 4 sec.
display 2 sec.
display 2 sec.
YES
USB=ON
NO
fig. 22
