A SERVICE OF

logo

Open as PDF
next previous
83
E
Rear turn indicators (fig. 67)
To change the rear turn indicator bulbs, rotate the indicator
body (1) by a quarter of a turn so that the lens is facing
upwards, and withdraw it from indicator support.
The bulb has a bayonet-type end fitting: to remove it, push it
in and turn it counter-clockwise. Push in the new bulb and
turn it clockwise until it clicks into place. Refit the indicator
body (2) to its support and rotate it by a quarter of a turn.
Number plate light (fig. 68)
To access the number plate light bulb, unscrew the bolt (3)
securing the cover (4). Remove the bulb and replace it.
4
3
fig. 68
1
2
fig. 67