16
E
At Key-On the instrument panel always shows the following
information (de-activating the previously activated functions):
Odometer
Air temperature
Clock
Speed
Coolant temperature
Engine rpm
At this point, with button (1, fig. 8) in position A “▲” it is still
possible to switch from the odometer function to the
following functions:
TRIP A
TRIP B
TRIP FUEL (only if active)
before returning to TOT (odometer).
If, however, you press button (1, fig. 8) in position B “▼“
the system goes into the MENU and displays the
following functions in sequence:
Error (only if active)
BATT
RPM
LAP (OFF or ON)
LAP MEM
USB (OFF or ON)
Erase USB
TIME Set
CODE (only if active)
Important
This menu is active only if the speed of the motorcycle
is less than 20 km/h. If this menu is on the display and the
speed of the motorcycle exceeds 20 km/h, the instrument
automatically exits the menu and returns to the initial display.
It is possible to exit the menu at any time, however, by
pressing button (1, fig. 8) in position A “▲” for 3 seconds.
A
B
1
fig. 8
