DXS/DWS 3200 Series User Guide
Page 242
The Bandwidth Settings Page contains the following fields:
• Unit no— Indicates the stacking members for which the bandwidth settings are displayed.
• Port— Indicates the port that is being displayed
• Ingress Rate Limit — Indicates the traffic limit for the port.
• Egress Shaping Rates — Configures the traffic shaping type for selected interfaces. The possible field val-
ues are:
– CIR — Defines CIR as the queue shaping type. The possible field value is 4096 - 1,000,000,000 bits per
second.
– CBS — Defines CBS as the queue shaping type. The possible field value is 4096-16,000,000 bytes.
• Remove — Deletes the currently selected view. The possible field values are:
– Checked — Removes the settings for the selected port.
– Unchecked — Maintains the settings.
2. Select an interface.
3. Click . The Bandwidth Settings Edit Page opens.
Figure 159:Bandwidth Settings Edit Page
4. Define the fields.
5. Click . The bandwidth settings are saved to interface, and the device is updated.
