5 - Eng
D24156
Fasteners could ricochet or be
propelled causing serious injury or
property damage.
Never point discharge of tool at self
or others.
Do not pull trigger unless tool con-
tact safety device is against work
surface.
Never attempt to drive fasteners
into hard surfaces such as steel,
concrete, or tile.
Take care to avoid driving a fasten-
er on top of another fastener.
Position tool carefully so that fas-
teners will be delivered to the
proper location.
RISK OF
ENTANGLEMENT
• Tools which contain moving
elements, or drive other
moving tools, such as grinding
wheels, sockets, sanding
discs, etc. can become entan-
gled in hair, clothing, jewelry
and other loose objects,
resulting in severe injury.
• Never wear loose fitting
clothes, or apparel which
contains loose straps or ties,
etc. which could become
entangled in moving parts of
the tool.
• Remove any jewelry, watches,
identifications, bracelets,
necklaces, etc. which might
become caught by the tool.
• Keep hands away from moving
parts. Tie up or cover long hair.
• Always wear proper fitting
clothing and other safety
equipment when using this
tool.
RISK OF
CUT OR BURNS
• Keep the working part of the
tool away from hands and
body.
HAZARD
WHAT COULD HAPPEN HOW TO PREVENT IT
RISK OF INJURY
(continued)
• Tools which cut, shear, drill,
staple, punch, chisel, etc. are
capable of causing serious in-
jury.
