48
ENGLISH
2
B
When “DVI SETUP” is selected:
Turning the select knob will display the following setting modes
on the display.
DVI OFF: (Factory default)
No output the signals from DVI-D connector.
480P:
Outputs the image from the DVI-D connector at 480P.
720P:
Outputs the image from the DVI-D connector at 720P.
1080i:
Outputs the image from the DVI-D connector at 1080i.
Select the item that you wish to set and press the select knob to
define it.
B
When “DVI BK (Black) LEVEL” is selected:
Turning the select knob will display the following setting modes
on the display.
NORMAL: (Factory default)
Signals are output from the DVI-D terminal with a digital RGB
video level (data range) of 16 (black) to 235 (white).
ENHANCED:
Signals are output from the DVI-D terminal with a digital RGB
video level (data range) of 0 (black) to 246 (white).
✽
When the DVI-D terminal is connected, the black may seem to
stand out, depending on the TV or Monitor you are using. In this
case, set this to “ENHANCED”.
Select the item that you wish to set and press the select knob to
define it.
(Exit the setting mode automatically.)
Press the PIC.ADJ button during playback or during
pause.
• The image quality adjustment screen will appear.
STD
Returns the settings to the factory default
settings.
M1 TO M5
Image quality settings that have been adjusted to
your preference can be stored to 5 memories, M1
to M5.
SET
SET permits set to setup level and setting of the
screen display position (horizontal and vertical).
B
When “PURE DIRECT” is selected:
Turning the select knob will display the following setting modes
on the display.
NORMAL: (Factory default)
All signals out. (Stop the direct mode)
VIDEO OFF:
Video signals are not output.
DIGITAL OFF:
Digital signals are not output.
ALL OFF:
No indicate in Display of the main unit, and video and digital
signals are not output. (except analog audio output)
Select the item that you wish to set and press the select knob to
define it.
(Exit the setting mode automatically.)
Main unit
