1
2
3
See page 24.
Use the
•
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
AUDIO CHANNEL
Use this to adjust for the connected speaker systems.
DIGITAL OUT
Use this to select the digital output’s signal format.
LPCM (44.1 kHz/48 kHz)
Use this to set the digital audio output when playing DVDs recorded in
linear PCM audio.
DENON LINK
Use this to output digital signals from the DENON LINK terminal.
IEEE1394
Use this to output digital signals from the IEEE 1394 terminal.
SOURCE DIRECT
This permits a setting to output the audio without adding speaker
settings or channel level processing to the audio signals of DVD audio
or Super Audio CD.
BASS ENHANCER
Set whether or not to output audio signals from the subwoofer when
playing two-channel audio signals.
✽
The BASS ENHANCER settings do not apply to digital outputs.
Use the
•
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
q
When “AUDIO CHANNEL” is selected:
B
Use the
•
and
ª
cursor buttons to select the item to be set, then
press the ENTER button.
MULTI CHANNEL (Factory default)
Select this for systems in which three or more speakers are
connected.
When MULTI CHANNEL is set, the speaker settings (SPEAKER
CONFIGURATION), speaker output level adjustment (CHANNEL
LEVEL) and speaker distances (DELAY TIME) can be set.
2 CHANNEL
Select this for systems in which only two speakers are connected.
