30
ENGLISH
3
w
When “WALL PAPER” is selected:
BLUE (Factory default)
Select this to display a blue background on the TV display.
GRAY
Select this to display a gray background on the TV display.
BLACK
Select this to display a black background on the TV display.
PICTURE
Select this to display the wallpaper on the TV display.
e
When “DISPLAY” is selected:
OFF (Factory default)
This is valid when the display has been switched off with the
DIMMER button. The display will not show an indication even when
the button (ex. skip, stop, etc.) has been pressed.
ON
This is valid when the display has been switched off with the
DIMMER button. When the button (ex. skip, stop, etc.) is pressed,
the indication will appear on the display for approximately 2 seconds.
✽ To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP button
on the remote control unit.
