PowerConnect B-Series FCX Configuration Guide 609
53-1002266-01
Viewing DSCP-based QoS settings
17
The show qos-tos command can also be used to display configuration information for 8 to 4 queue
mapping. The following example displays 8 to 4 queue mapping configuration.
TABLE 104 DSCP-based QoS configuration information
This field... Displays...
DSCP to traffic class map
d1 and d2 The DSCP to forwarding priority mappings that are currently in effect.
NOTE: The example shows the default mappings. If you change the mappings,
the command displays the changed mappings
Traffic class to 802.1 priority map
Traffic Class and 802.1p
Priority
The traffic class to 802.1p priority mappings that are currently in effect.
NOTE: The example shows the default mappings. If you change the mappings,
the command displays the changed mappings.
