542 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying Information about MAC-based VLANs
15
Displaying MAC addresses in a MAC-based VLAN
Enter the following command to display a list of MAC addresses in a MAC-based VLAN.
In this output, (MBV) indicates MAC-based VLAN is enabled.
The following table describes the output from this command.
This field... Displays...
Total active entries The total number of active entries for all ports.
MAC Address The MAC addresses assigned to this VLAN.
Port The interface for which this information is displayed.
Type Dynamic (MBV) Indicates a dynamic host. Static (MBV) indicates a static host.
Index The index of the entry in the hardware MAC table.
VLAN The VLAN to which these addresses are assigned.
PowerConnect#show mac-address
Total active entries from all ports = 1541
MAC-Address Port Type Index VLAN
0000.2000.0001 0/1/32 Dynamic(MBV) 1048 1
0000.2000.0002 0/1/32 Dynamic(MBV) 1832 1
0000.2000.0003 0/1/32 Dynamic(MBV) 9772 1
0000.2000.0004 0/1/32 Static(MBV) 328 1
0000.2000.0005 0/1/32 Dynamic(MBV) 8268 1
0000.2000.0006 0/1/32 Dynamic(MBV) 9084 1
0000.2000.0007 0/1/32 Dynamic(MBV) 632 1
0000.2000.0008 0/1/32 Dynamic(MBV) 3464 1
0000.2000.0009 0/1/32 Dynamic(MBV) 11404 1
0000.2000.000a 0/1/32 Dynamic(MBV) 12220 1
0000.2000.000b 0/1/32 Dynamic(MBV) 3768 1
