Advanced Features 59
2 Lay the computer down on its right side.
3 Open the computer cover.
4 Install the TAPI-compliant expansion card.
See the manufacturer’s documentation for more information.
5 Enter system setup, click Integrated Devices, and change the setting
for Sound to Off.
6 Connect external audio devices to the sound card’s connectors. Do not
connect external audio devices to the microphone,
speaker/headphone, or line-in connectors on the computer back panel
(see "Back-Panel Features").
7 Connect the 4-pin TAPI cable to the TAPI sound-card connector.
To locate the TAPI connector on the sound card, see the
manufacturer’s documentation.
8 Connect the 4-pin TAPI cable to the TAPI expansion-card connector.
To locate the TAPI connector on the expansion card, see the
manufacturer’s documentation.
9 Close the computer cover.
10 Stand the computer upright.
11 Reconnect the computer and devices to their electrical outlets, and
turn them on.
NOTE: If enabled, the Chassis Intrusion option will cause the following
message to be displayed at the next system start-up:
ALERT! Cover was previously removed.
12
Install the appropriate TSP for the TAPI devices.
See the manufacturer’s documentation and your Windows
documentation for more information.
