A SERVICE OF

logo

8
LIGHT
ADAPTER
SCREWS
LIGHT
ADAPTER
PLATE
LIGHT
FIXTURE
Step 9a. Beforegettingstarted,removetherubberband
fromtheplugconnector.
Step 9b. Installtwo ofthethreelightadapterscrews
into the light adapter plate. Thread theplug connec-
torthroughthehole inthecenterofthelight adapter
plate.
Step 9c. Alignthetwokeyslotholeswiththetwoscrews
androtatethelightadapterplateclockwise.Installthe
thirdlightadapterscrewandsecurelytightenallthree
screws.Tightenthescrewsrmlybyhandonly.
Step 9d. Connectthelightxtureplugtotheplugfrom
thebottomofthefan.
Step 9e. Alignthelightxturetothethreescrewholes
onthelightadapterplateusingthelightxturescrews,
thenattachthelightxturetothefan.
ATTACHING THE LIGHT FIXTURE
STEPS 9a - 9c
STEPS 9d
STEPS 9e
LIGHT
FIXTURE
SCREWS