Casablanca Fan Company C28GXXM Manual

Open as PDF

next previous

Send Signal

LED

FanControl

Tostart thefan. Pressthe selected speedbutton torun the fanat the desired

speed.

LOW=LowspeedMED=MediumspeedHIGH=Highspeed

Toturnoffthefan,presstheFANOFFbutton.

AirowDirection

Toreversetheairow,presstheREVERSEbutton.REVERSEoperatesatanyspeed

whetherthefanisonoroff.Thefanreturnstoitssetspeedafterreversing.

LightControl

TurnthelightonoroffindependentlyfromthefanbypressingtheLIGHTbutton.

Ifyoupressthebuttonformorethan0.7seconds,itbecomesadimmer.Thelight

variesfrom“bright"to“dim”overapproximately8seconds.Ifyoucontinuetohold

theLIGHTbutton,thissequencewillreversewhenthelightreachesitsbrightestor

dimmestlevel.Releasethebuttonwhenthedesiredlevelisreached.

MemoryFeature

Thelastlightfuctionandfanspeedwillresumewhenpoweristurnedbackon.

AutoResume

Quick(pressinglessthan0.7seconds)on/offoperationoftheLIGHTbuttonmaintains

thedesiredbrightnesslevelsetpreviously.

Ifthefanisnotfunctioningafterinstallation:

Step1.Checktomakesurethatbatteriesareinstalledcor-

rectlyinthecontrol.

Step2.Turnthepowerofftothefan(fromthecircuitbreaker)

foratleast5seconds.

Step3.Turnthepowerbackon(atthecircuitbreaker)and

pushtheHIGH,MED,andLOWbuttons–inthatorder–within

20seconds.

Step4.Thefanshouldnowfunctionproperly.

CHANGING TRANSMITTER FREQUENCY SETTING

Youwillonlyhavetochangethedipswitchsettingsinthe

remoteifyouareusingmorethanonefaninthesamearea

andwanttocontrolthemseparately.

Step1.Atthecircuitbreakerorfusebox,turnthepoweroff

forthefanyouwanttochange.

Step2.OpenthebatterydooroftheVersa•Touchcontroland

removethebatteries.

Step3.Changethedipswitchsettings,assuringthattheyare

differentfromthepreviouslyinstalledVersa•Touchfan.

Step4.Re-installthebatteriesandthebatterydooronthecontrol.

Step5.Atthecircuitbreakerorfusebox,turnthepowerback

onforthefanwhosefrequencyyouarechanging.

Step6.Within20secondsofrestoringpower,pushtheHIGH,

MED,andLOWbuttons(inthatorder).

CIRCUIT

BREAKER

OR FUSE BOX

PRESS IN THIS ORDER TO SET

NEW FREQUENCY:

1. HIGH 2. MED 3. LOW

DIP SWITCH

SET TO

“01001”

DIP SWITCH

SET TO

“10000”

VERSA•TOUCH 2

CONTROL

(BACK)

LOW

MED

HIGH

LIGHT

FAN

OFF

REVERSE

Note:Youmaywanttolabelyourcontrolstoassure

youdonotmixthemup.

REMOTE OPERATION

WARNING!

Do not turn the power oﬀ at the circuit breaker, then

back on, for the previously installed Versa•Touch2

fan(s), as you may inadvertently change the

frequency settings for it as well.

Note:Allfansleavethefactorysetto“00000.”