A SERVICE OF

logo

Open as PDF
next previous
3
Star
™
/ Starlet
™
INSTALLATION INSTRUCTIONS
Unpacking: Beforeassemblingandinstallingyourceilingfan,removeallpartsfromtheshippingcartonsand
checkthemagainstthepartslistedhere.Beforediscardingpackagingmaterial,becertainthatallpartshavebeen
removed.
FAN PREPARATION
Prepare for fan installation as follows:
Step A. Route the wires fromthe motor through the
Perma
•
Lock™downrodandballassembly.
MOTOR
COUPLING
TAPERED
THREAD
MOTOR
WIRES
GROUND
WIRE
Step B. Threadthedownrodintothemotorcouplingand
turnitclockwiseuntilitstopsturning,ensuringthatthe
polehasbottomedout.
Step C.Securelytightenthelockingbolttoensuresafe
operationofyourfan.
Tip: The downrod has a tapered
thread that is designed to lock com-
pletely when correctly installed.
CAUTION: Failure to fully lock in the down-
rod before securely tightening the locking
bolt may cause the fan to separate from the
downrod during normal operation!
IMPORTANT SAFETY INFORMATION!
BEFORE STARTING THE INSTALLATION OF YOUR CEILING
FAN, INSTALL THE THREADED DOWNROD INTO THE MO-
TOR COUPLING AND LOCK THE ASSEMBLY
LOCKING
BOLT
DOWNROD
&
BALL
ASSEMBLY
LOCKING BOLT
(MOTOR COUPLING)
DOWNROD & BALL
ASSEMBLY
PERMA
•
LOCK™ HARDWARE
Setup: Removethefanbodyfromthebox
andplacethebodyofthefanontopofacloth
onaatsurface.Thiswillprotectthefanbody
frombeingscratchedduringassembly.
SETUP