Printing Maintenance
59
1 With the printer on, load a sheet of Letter-sized plain paper in the printer.
Move the Paper Thickness Lever (gray) to the right position.
2 Open the BJ Printer Utility dialog box.
(1) Double-click the hard disk icon where the printer driver was installed, the
Applications folder, and the Utilities folder.
(2) Double-click the Printer Setup Utility icon.
If you are using an OS other than Mac OS X v.10.3, double-click the Print Center
icon.
(3) Select iP90 from the Name list and click Utility or Configure.
(4) Select iP90 from the Product list and click Maintenance.
3 Print the pattern.
Note
The BJ Printer Utility cannot be used with Bluetooth communication.
(1) Select Test Print from
the pop-up menu.
(2) Click Print Head Alignment.
(3) Click Print Head Alignment.
The Pattern will be printed.
Note
Click Check
Setting to print
the current setting
and finish the
operation.
QSG_Aligning_Print_Head.fm Page 59 Monday, October 25, 2004 2:46 PM
