Basic Printing
6
Loading Envelopes
Use either DL or US Comm. #10 size envelopes.
(3) Select Envelope in Media Type, and then select Comm. Env. #10 or DL Env. in
Page Size.
For the printer driver setting, refer to "Printing with Windows" on page 10,
"Printing with Macintosh" on page 12.
Note
• Do not stack more than 10 sheets in the Paper Output Slot Cover.
• Do not touch the printed surfaces until the ink dries. For specific
drying times, refer to the instructions packaged with your media.
Important • Do not use envelopes with embossed or treated surfaces, a double
flap, pressure seals or sticker flaps.
• Select either DL Env. or Comm. Env. #10 according to the envelope
size you are using.
o
t
e enve
ope
ap s
ut.
(1) Align the envelope
against the right side of
the Auto Sheet Feeder.
The flap of the envelope
will appear with its flap
facing up on the left side.
A maximum of 5
envelopes can be loaded
at once.
Printing direction
(2) Slide the Paper Guide against the left side of
the envelope.
QSG_Basic.fm Page 6 Monday, October 25, 2004 2:42 PM
