A SERVICE OF

logo

Printing Maintenance
57
Aligning the Print Head
If ruled lines are displaced or the print result is unsatisfactory, Print Head alignment is
required.
ì
1 With the printer on, load a sheet of Letter-sized plain paper in the printer.
Move the Paper Thickness Lever (gray) to the right position.
2 Open the Printer Properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on
page 29.
3 Print the pattern.
(1) Click the Maintenance tab.
(2) Click Print Head Alignment.
(3) Click Print Head Alignment.
When the confirmation message is
displayed, click OK.
The Pattern will be printed.
Note
Click Check Setting to
print the current
setting and finish the
operation.
QSG_Aligning_Print_Head.fm Page 57 Monday, October 25, 2004 2:46 PM