CHAPTER 4: BASIC OPERATIONS
33
To disable password protection, complete the following steps:
1. Press Print Screen. The Main window opens.
2. Click Setup > Security. In the Password window, type the password and click OK.
3. Double-click the New field. Leave the field blank, and press Enter.
4. Double-click the Repeat field. Leave the field blank, and press Enter.
5. Click OK.
4.7 Setting the preemption warning
Administrators and users with certain access rights can preempt (disconnect) KVM
sessions and take control of the target device. You can choose whether or not to warn the
first user that the session will be preempted and specify how long the appliance will wait
for the first user to respond to the warning.
For more information about preempting sessions and preemption settings, see the
ServSelect IP VM Software Installation and User’s Guide.
To view or change the preemption warning settings, complete the following
steps:
1. Press Print Screen. The Main window opens.
2. Click Setup > Preempt.
3. Enter a number of seconds in the Timeout Seconds field.
• If you enter a value of 0 to 4 seconds, the first user will not be warned before the
session is preempted.
• If you enter a value of 5 to 120 seconds, the first user will be warned and will be
allowed to continue using the target device for up to the amount of time in the
Timeout Seconds field. The session will be preempted when the user clicks
OK, or when the specified time elapses.
4. Click OK to save the settings.
Figure 4-12. Preempt window
