SERVSELECT IP VM INSTALLER/USER GUIDE
24
• Locked - Select this check box to specify that when the user is disconnected
from a target device, the virtual media is also disconnected.
• Reserve - Select this check box to specify that the virtual media connection can
be accessed only by your user name and that no other user can connect to that
target device. If both Locked and Reserved are selected, the session will be
reserved.
• CD ROM - Select this check box to establish a virtual media CD connection to
a target device. Clear this check box to end the connection.
• Mass Storage - Select this check box to establish a virtual media mass-storage
connection to a target device. Clear this check box to end the connection.
• Write Access - Select this check box to enable the connected target device to
write data to the virtual media during a virtual media session. Read access is
always enabled during virtual media sessions.
6. Click OK.
4.6 Configuring the appliance and the OSD interface
To configure the appliance and the OSD interface, start the OSD interface and click
Setup. The following illustration shows the Setup window.
Figure 4-2. Setup window
The following table describes the options in the Setup window.
Setup features to manage routine tasks for the target devices
Option Purpose
Menu
Order the list of target devices by target device name, eID number,
or port number. Set a screen delay to specify the length of time that
elapses between when Print Screen is pressed and when the OSD
interface starts.
