A SERVICE OF

logo

SERVSELECT II™ INSTALLER/USER GUIDE
14
3.3 Installing the ServSelect II
Plug the supplied power cord into the back of the appliance and then into an
appropriate power source. Figure 3-2 illustrates one possible configuration for your
ServSelect appliance. See the following detailed set of procedures to successfully install
your appliance.
Figure 3-2. Basic ServSelect II Configuration
CAUTION:
To reduce the risk of electric shock or damage to your equipment-
- Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
- Disconnect the power from the unit by unplugging the power cord from either the electrical
outlet or the unit.
1357 9111315
2468 10121416
Configuration Port
for updating firmware
Analog User B
Analog User A
ServSelect II Appliance
Servers 2-16
Sam Adaptor
PS/2 USB and Sun
adaptors are available
Server 1
Currently
Not Used