SERVSELECT II™ INSTALLER/USER GUIDE
12
3. Installation
3.1 Getting Started
Before installing your ServSelect II appliance, refer to the following list to ensure
you have all items that shipped with the appliance as well as other items necessary
for proper installation.
Supplied with the ServSelect II
• ServSelect II unit
• Power cord
• One null modem serial cable
• ServSelect II Installer/User Guide
• ServSelect II Quick Installation Guide
• Rack mounting kit
Additional items needed
One SAM adaptor and UTP cabling per attached server or switch
3.2 Rack Mounting Your ServSelect II
NOTE:
Rack mounting kits are sold separately.
Your ServSelect II appliance may be rack mounted using the included brackets. Before
installing the appliance and other components in the rack cabinet (if not already
installed), stabilize the rack in a permanent location. Install your equipment starting
at the bottom of the rack cabinet, then work to the top. Avoid uneven loading or
overloading of rack cabinets.
CAUTION:
Rack Loading - Overloading or uneven loading of racks may result in shelf or rack failure,
causing damage to equipment and possible personal injury. Stabilize racks in a permanent
location before loading begins. Mount components beginning at the bottom of the rack, then
work to the top. Do not exceed your rack load rating.
