Version 6.2 171 December 2010
SIP Release Notes 3. Known Constraints
3.9.2 SNMP Constraints
This release includes the following known Simple Network Management Protocol (SNMP)
constraints:
1. When configuring acSysInterfaceTable using SNMP or the Web interface, validation is
performed only after device reset.
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
2. The DS3 ifAdmin-State field cannot be changed in the IF-Table, using SNMP.
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
3. When setting snmpTargetAddrTagList to NULL (by removing a row in the
snmpTargetAddrTable) without changing the corresponding entry in the
snmpCommunityTable, an inconsistency occurs when a switchover occurs between
the Active and Redundant blades. In the Active blade, the object appears with a NULL
value; in the Redundant blade, a non-NULL value appears.
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
