Version 6.2 13 December 2010
SIP Release Notes 1. What's New in Release 6.2
1.1.2.3 Mediant 800 MSBG
This release supports the following existing hardware platforms:
Analog telephony interfaces, offering only FXS or only FXO interfaces, or a
combination thereof. For a list of available hardware configurations and models, refer
to Table 1-1.
Optional, an
alog Lifeline on FXS Port 1, maintaining PSTN connectivity upon power
failure. For the combined FXS/FXO configuration, one Lifeline is available; for the 12-
FXS configuration, up to three Lifelines are available.
One set of ISDN Basic Rate Interface (BRI) interfaces, providing four RJ-45 BRI S/T
ports (supporting up to 8 voice channels) for connecting ISDN terminal equipment
such as ISDN telephones. Each BRI port can be configured either as termination
equipment/user side (TE) or network termination/network side (NT). Up to eight TE
devices can be connected per BRI S/T port, by using an ISDN S-bus that provides
eight ISDN ports.
Optional, Open Solutions Network (OSN) server platform for hosting third-party
applications such as IP PBX, based on the following:
• CPU: Intel™ Atom 1.6 GHz processor (Intel Atom N270)
• Memory: 1 GB (or 2 GB for devices with 12 FXO ports)
• Hard disk drive (HDD): SATA with minimum of 20 GB
• OSN ports (on rear panel) includes the following:
♦ Three USB ports (Standard-A type) for connecting computer peripherals
(e.g., mouse and keyboard)
♦ 15-pin DB-type VGA port for connecting a monitor
• OSN LEDs (on front panel) for hard disk drive (HDD) and link activity
• Operating System – Microsoft Windows and Linux distributions (for certified
support, please contact AudioCodes)
Single WAN port (10/100/1000Base-T copper).
Twelve Ethernet LAN ports, supporting half- and full-duplex modes, auto-negotiation,
and straight or crossover cable detection:
• Up to four RJ-45 10/100/1000Base-T (Gigabit) ports
• Eight RJ-45 10/100Base-TX (Fast Ethernet) ports
Power-over-Ethernet (PoE) supported on all LAN ports, complying with IEEE 802.3af-
2003. The maximum wattage per port is 15.4W, providing a total wattage of 120W for
all ports.
Front-panel LEDs providing operating status of FXS/FXO interfaces, LAN interfaces,
WAN interface, PoE, OSN, and power supply.
Three-prong AC supply entry for AC power (standard electrical outlet) - single,
universal 90-260 VAC.
Protective earthing screws for grounding.
Desktop or 19-inch rack mounting (using external mounting brackets).
