Service Procedures: Unscheduled Maintenance
InfraStruXure InRow RC 31
Part No. Qt
:
Field Service
Bulletin:
Unit Amp Ratin
Unit Power
"A
Unit Voltage
Rating
Unit Power "A"
Voltage
Temp:
Temp:
Yes/No
Part S/N:Part Description:
List of all parts Removed/Replaced from the IR-RC: Reason for removal:
APC Representative (Please Print):Customer Name (Please Print):
List issues preventing the Unit from being fully
Issue:
General Comments:
3. If the Unit is not completely Operational please list the issues & who is
responsible for the resolving the issues so that the Unit can be fully
functional.
8. List the current firmware on the Network Management Card
Final Checks:
1. The interior/Exterior of the unit is clean free of debris?
2. The area around the Unit is clean and orderly?
Comments:
Return Chilled Water Temp
Supply Air Temp
5. What is the Chilled Water flow to the unit? GPM:
Remote Sensor (Rack Inlet)
Supply Chilled Water Temp
Confirm the Base line measurements below:
Defective:
Return Air Temp
Reco
4. What is the Chilled Water set point for the Chiller supplying Chilled Water
to the unit?
Inadequate
Maintenance:
7.
Was the firmware upgraded?
AOS Firmware Rev.
2. Does Power Supply "A" & "B" voltage match Unit nameplate?
List any other changes not captured on the above line items here:
Recor
3. What is the Chilled Water supply temperature to the unit?
6.
Is all of the (7) sensors reading properly?
1. Do the field circuit breakers for Main Power "A" and Main Power "B"
match unit name plate?
