Filter
Top Products
PERIODIC MAINTENANCE AND MINOR REPAIR
6-10
6
2. Disconnect the turn signal light
lead coupler.
To install the cowling
1. Connect the turn signal light lead
coupler.
2. Fit the projections on the cowling
into the slots and slide it forward.
3. Install the quick fasteners and the
quick fastener screws.
EAU42951
Cowling C
To remove the cowling
1. Remove cowling A. (See page
6-9.)
2. Remove the bolts and the quick
fastener screws.
3. Slide the cowling backward to un-
hook its projections from the slots,
and then pull the cowling off.
1. Cowling B
2. Quick fastener
1. Turn signal light lead coupler
1. Slot
2. Projection
1. Bolt
2. Quick fastener screw
3. Cowling C
1. Cowling C
2. Slot
3. Projection
U4C810E0.book Page 10 Wednesday, September 27, 2006 3:06 PM