Yamaha YZFR1W(C) Motorcycle User Manual


 
PRE-OPERATION CHECKS
4-3
4
Throttle grip
Make sure that operation is smooth.
Check cable free play.
If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
6-21, 6-30
Control cables
Make sure that operation is smooth.
Lubricate if necessary.
6-30
Drive chain
Check chain slack.
Adjust if necessary.
Check chain condition.
Lubricate if necessary.
6-28, 6-29
Wheels and tires
Check for damage.
Check tire condition and tread depth.
Check air pressure.
Correct if necessary.
6-22, 6-24
Shift pedal
Make sure that operation is smooth.
Correct if necessary.
Brake pedal
Make sure that operation is smooth.
Correct if necessary.
Brake and clutch levers
Make sure that operation is smooth.
Lubricate lever pivoting points if necessary.
6-31
Sidestand
Make sure that operation is smooth.
Lubricate pivot if necessary.
6-32
Chassis fasteners
Make sure that all nuts, bolts and screws are properly tightened.
Tighten if necessary.
Instruments, lights, signals
and switches
Check operation.
Correct if necessary.
Sidestand switch
Check operation of ignition circuit cut-off system.
If system is defective, have Yamaha dealer check vehicle.
3-22
ITEM CHECKS PAGE
U4C810E0.book Page 3 Wednesday, September 27, 2006 3:06 PM