Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-24
3
Rebound damping force
Adjust the rebound damping force as
follows.
1. Remove the bolt, loosen and re-
move the quick fastener screw,
and then pull the cowling away
from the motorcycle.
2. To increase the rebound damping
force and thereby harden the re-
bound damping, turn the adjusting
screw in direction (a). To decrease
the rebound damping force and
thereby soften the rebound damp-
ing, turn the adjusting screw in di-
rection (b).
3. Place the cowling in its original po-
sition, install and tighten the quick
fastener screw, and then install the
bolt.
Compression damping force
Compression damping force (for fast
compression damping)
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting bolt in
direction (a). To decrease the compres-
sion damping force and thereby soften
the compression damping, turn the ad-
justing bolt in direction (b).
1. Quick fastener screw
2. Bolt
3. Cowling
1. Rebound damping force adjusting screw
Rebound damping setting:
Minimum (soft):
18 click(s) in direction (b)*
Standard:
14 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned
in direction (a)
1. Compression damping force adjusting bolt
(for fast compression damping)
2. Compression damping force adjusting screw
(for slow compression damping)
U4B1E0E0.book Page 24 Wednesday, October 12, 2005 2:32 PM