Filter
Top Products
8-40
8
7. Squeeze the excess solvent out of the sponge
material and let it dry.
NOTICE
ECB00440
Do not twist the sponge material when squeez-
ing it.
8. Check the sponge material and replace it if
damaged.
9. Apply Yamaha foam air filter oil or other qual-
ity foam air filter oil to the sponge material.
TIP
The sponge material should be wet but not drip-
ping.
10. Install the mesh and the sponge material into
the air filter case.
11. Insert the projections on the air filter case cov-
er into the holders on the air filter case, and
then install the air filter case cover by hooking
the holders onto the cover.
12. Place the hoses in their original position as
shown.
HOW TO AVOID THE HAZARD
Use parts cleaning solvent to clean the
sponge material.
U28P10E0.book Page 40 Thursday, April 10, 2008 9:29 AM