Filter
Top Products
8-23
8
4. Remove the dipstick, and then wipe it off with
a clean rag.
5. Insert the dipstick completely into the oil filler
hole, and then remove it again to check the oil
level.
TIP
The engine oil should be between the minimum
and maximum level marks.
6. If the engine oil is at or below the minimum
level mark, add sufficient oil of the recom-
mended type to raise it to the correct level.
7. Insert the dipstick completely into the oil filler
hole.
8. Install the panel.
1. Dipstick
1. Maximum level mark
2. Minimum level mark
U28P10E0.book Page 23 Thursday, April 10, 2008 9:29 AM