Filter
Top Products
8-24
8
NOTICE
ECB00850
Be sure the engine oil is at the correct level,
otherwise engine damage may result.
To change the engine oil (with or without oil fil-
ter cartridge replacement)
1. Place the ATV on a level surface.
2. Remove panel F. (See page 8-8.)
3. Place an oil pan under the engine to collect
the used oil.
4. Remove the dipstick, and then remove the en-
gine oil drain bolt to drain the oil from the
crankcase.
TIP
Skip steps 5–9 if the oil filter cartridge is not being
replaced.
5. Remove panel G. (See page 8-8.)
6. Remove the oil filter cartridge with an oil filter
wrench.
TIP
An oil filter wrench is available at a nearby Yamaha
dealer.
7. Apply a thin coat of engine oil to the O-ring of
the new oil filter cartridge.
1. Engine oil drain bolt
1. Oil filter cartridge
2. Oil filter wrench
U28P10E0.book Page 24 Thursday, April 10, 2008 9:29 AM