Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-11
3
To unlock the steering
1. Insert the key into the steering
lock.
2. Turn the key 1/2 turn counterclock-
wise.
3. Remove the key.
EAU34042
Rider seat
To remove the rider seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2. While holding the key in that posi-
tion, lift the front of the seat up, and
then pull the seat off.
To install the rider seat
1. Insert the projection on the rear of
the seat into the seat holder as
shown.
2. Push the front of the seat down to
lock it in place.
3. Remove the key.
NOTE:
Make sure that the seat is properly se-
cured before riding.
1. Unlock.
1. Seat lock
2. Unlock.
1. Projection
2. Seat holder
U29S10E0.book Page 11 Friday, May 18, 2007 1:53 PM