Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-3
3
● two tripmeters (which show the
distance traveled since they were
last set to zero)
● a fuel reserve tripmeter (which
shows the distance traveled on the
fuel reserve)
● a clock
● a self-diagnosis device
● a brightness control mode
NOTE:
Be sure to turn the key to “ON” before
using the “SELECT” and reset switch-
es, except for setting the brightness
control mode.
Speedometer
When the key is turned to “ON”, the
speedometer needle will sweep once
across the speed range and then return
to zero in order to test the electrical cir-
cuit.
Fuel gauge
The fuel gauge indicates the amount of
fuel in the fuel tank. The needle moves
towards “E” (Empty) as the fuel level
decreases. When the needle reaches
“E”, approximately 3.2 L (0.85 US gal)
(0.70 Imp.gal) remain in the fuel tank. If
this occurs, refuel as soon as possible.
When the key is turned to “ON”, the fuel
gauge needle will sweep once across
the fuel level range and then return to
the current amount in order to test the
electrical circuit.
NOTE:
● Do not allow the fuel tank to empty
itself completely.
1. “SELECT” switch
1. Reset switch
1. Speedometer
10
0
20
30
40
50
60
70
80
90
100
11 0
12 0
13 0
14 0
MPH
km/h
220
220
200
200
160
60
180
80
140
40
120
20
100
00
80
80
60
60
40
40
20
20
0
1
1. Fuel gauge
U29S10E0.book Page 3 Friday, May 18, 2007 1:53 PM