Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
4-24
4
4. Insert the projection on the rear of
the rider seat into seat holder A as
shown.
To change the rider seat height to
the high position
1. Remove the rider seat. (See page
4-22.)
2. Remove the rider seat height posi-
tion adjuster by pulling it out.
3. Install the rider seat height position
adjuster so that the match mark is
aligned with the “H” mark as
shown.
4. Insert the projection on the rear of
the rider seat into seat holder B as
shown.
TIP
Make sure that the seats are properly
secured before riding.
1. Projection
2. Seat holder A (for low position)
1
2
1. Rider seat height position adjuster
1. Rider seat height position adjuster
2. “H” mark
3. Match mark
1
2
3
1
1. Projection
2. Seat holder B (for high position)
1
2
U23P10E0.book Page 24 Monday, May 9, 2011 2:53 PM