Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
4-13
4
LCD and tachometer brightness
control mode
This function allows you to adjust the
brightness of the LCD, and the tachom-
eter panel and needle to suit the out-
side lighting conditions.
To set the brightness
1. Turn the key to “OFF”.
2. Push and hold the left button.
3. Turn the key to “ON”, and then re-
lease the left button after five sec-
onds.
4. Push the right button to select the
desired brightness level.
5. Push the left button to confirm the
selected brightness level. The dis-
play returns to the odometer or
tripmeter mode.
EAU12348
Handlebar switches
Left
Right
1. Tachometer panel
2. Tachometer needle
3. LCD
4. Brightness level
5. Right set button
6. Left set button
1 2 3 4
6 5
1. Dimmer switch “ / ”
2. Turn signal switch “ / ”
3. Horn switch “”
1. Engine stop switch “ / ”
2. Drive mode switch “MODE”
3. Start switch “”
1
2
3
1
2
3
U23P10E0.book Page 13 Monday, May 9, 2011 2:53 PM