Filter
Top Products
6-41
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
3. Lift the front wheel off the ground
according to the procedure on
page 6-40.
4. Remove the axle nut, pull the
wheel axle out, and then remove
the wheel.
ECA00048
cC
Do not apply the brake after the
wheel has been removed together
with the brake disc, otherwise the
brake pads will be forced shut.
EAU03518
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the
projections mesh with the slots.
2. Lift the wheel up between the
fork legs.
NOTE:
Make sure that there is enough
space between the brake pads
before inserting the brake disc and
that the slot in the speedometer gear
unit fits over the retainer on the fork
leg.
1. Retainer
2. Speedometer cable
2
1
1
2
EAU03517
Front wheel
To remove the front wheel
EW000122
w
8 It is advisable to have a
Yamaha dealer service the
wheel.
8 Securely support the motorcy-
cle so that there is no danger
of it falling over.
1. Disconnect the speedometer
cable from the front wheel.
2. Loosen the axle nut.
1. Speedometer cable
2. Axle nut
5FY-9-14 (TW200, USA) 5/11/01 8:31 AM Page 80