Filter
Top Products
4-2
PRE-OPERATION CHECKS
1
2
3
4
5
6
7
8
9
Throttle grip
• Make sure that operation is smooth.
• Check free play.
• If necessary, have Yamaha dealer make adjustment or lubricate.
6-18
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-30
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-28–6-30
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-18–6-21
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-31
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-31
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-31
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights,
signals and switches
• Check operation.
• Correct if necessary.
3-2–3-3, 6-37–6-39
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-10
ITEM CHECKS PAGE
5FY-9-14 (TW200, USA) 5/11/01 8:31 AM Page 32