Yamaha TW200N Motorcycle User Manual


 
3-2
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
EAU00095
Speedometer unit
The speedometer unit is equipped
with a speedometer, an odometer
and a tripmeter. The speedometer
shows riding speed. The odometer
shows the total distance traveled.
The tripmeter shows the distance
traveled since it was last set to zero
with the reset knob. The tripmeter
can be used to estimate the distance
that can be traveled with a full tank of
fuel. This information will enable you
to plan future fuel stops.
1. Speedometer
2. Odometer
3. Tripmeter
4. Reset knob
EAU00118
Handlebar switches
EAU00121
Dimmer switch
Set this switch to “&” for the high
beam and to “%” for the low beam.
EAU00127
Turn signal switch
To signal a right-hand turn, push this
switch to “6”. To signal a left-hand
turn, push this switch to “4”. When
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after
it has returned to the center position.
1. Dimmer switch
2. Turn signal switch
3. Horn switch “*
4
2
3
1
1
2
3
EAU00056
Indicator lights
EAU00057
Turn signal indicator light “5
This indicator light flashes when the
turn signal switch is pushed to the left
or right.
EAU00063
High beam indicator light “&
This indicator light comes on when
the high beam of the headlight is
switched on.
EAU00061
Neutral indicator light “N”
This indicator light comes on when
the transmission is in the neutral
position.
1. Turn signal indicator light “5
2. High beam indicator light “&
3. Neutral indicator light “N”
312