Filter
Top Products
Specifications
84
ESU12468
Dimensions:
Overall length:
RX10LT 3000 mm (118.1 in)
RX10MT 3335 mm (131.3 in)
RX10R 2805 mm (110.4 in)
Overall width:
RX10LT 1225 mm (48.2 in)
RX10MT 1165 mm (45.9 in)
RX10R 1225 mm (48.2 in)
Overall height:
RX10LT 1160 mm (45.7 in)
RX10MT 1185 mm (46.7 in)
RX10R 1160 mm (45.7 in)
Dry weight:
RX10LT 274.0 kg (604 lb)
RX10MT 276.0 kg (608 lb)
RX10R 265.0 kg (584 lb)
Ski stance:
RX10LT 1086 mm (42.8 in)
RX10MT 980 mm (38.6 in)
RX10R 1086 mm (42.8 in)
Engine:
Type:
Liquid cooled 4-stroke, 20 valves
Cylinder arrangement:
Backward-inclined parallel 4-cylinder
Displacement:
998 cm³
Bore × stroke:
74.0 × 58.0 mm (2.91 × 2.28 in)
Idling speed:
1400–1600 r/min
Engine oil:
Recommended grade:
API service SG type or higher, JASO
standard MA
Recommended brand:
YAMALUBE
Type:
SAE 0W-30
Fuel injection:
ID mark:
8FP1 10
Fuel:
Type:
REGULAR UNLEADED GASOLINE
ONLY
Minimum pump octane (R+M)/2:
86
Starting system:
Electric starter
Chassis:
Drive track:
Material:
Molded rubber, fiberglass-rod reinforced
Type:
Internal drive type
Width:
RX10LT 381 mm (15.0 in)
RX10MT 406 mm (16.0 in)
RX10R 381 mm (15.0 in)
Deflection:
30.0–35.0 mm (1.18–1.38 in)
Length on ground:
RX10LT 960 mm (37.8 in)
RX10MT 1201 mm (47.3 in)
RX10R 768 mm (30.2 in)
Rear suspension:
Type:
Slide rail suspension
Track sprocket wheel:
Material:
Polyethylene
Number of teeth:
RX10LT 9
RX10MT 7
RX10R 9
Transmission:
Clutch type:
Automatic centrifugal engagement
Overall reduction ratio:
RX10LT 6.28–1.65 :1
RX10MT 7.60–2.00 :1
RX10R 6.02–1.58 :1
Sheave distance:
267.0–270.0 mm (10.51–10.63 in)
Sheave offset:
13.5–16.5 mm (0.53–0.65 in)
Engagement speed (Subject to change
according to elevation settings.):
3300–3700 r/min
Shift speed [Subject to change according to
elevation settings. Usually achieved after
approximately 800 m (0.5 mi) traveled.]:
10250–10750 r/min
Drive chain type:
Silent chain enclosed in oil bath
U8FP15E0.book Page 84 Thursday, July 23, 2009 11:01 AM