Filter
Top Products
Control functions
30
3. Tighten the locknut while holding the ad-
justing nut in place. NOTICE: Always
tighten the locknut against the adjust-
ing nut, and then tighten the locknut to
the specified torque.
[ECS00860]
1. Red paint area
2. Adjustable range
3. Standard position
Locknut tightening torque:
25 Nm (2.5 m·kgf, 18 ft·lbf)
U8FP15E0.book Page 30 Thursday, July 23, 2009 11:01 AM