Filter
Top Products
Control functions
27
TIP
When the brake lever is squeezed, the brake
light comes on.
NOTICE
ECS00060
Make sure that the brake lever end does
not project out over the handlebar end.
This will help prevent brake lever damage
when the snowmobile is placed on its side
for service.
ESU10581
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
To release the parking brake, move the park-
ing brake lever to the right.
ESU10593
Shift lever
The shift lever is used to put the snowmobile
into forward or reverse. After coming to a
complete stop, pull the shift lever out, slide it
to “FWD” or to “REV” until it stops, and then
release it.
RS90P / RS90PLT / RST90PGT
1. Brake lever
1. Parking brake lever
1. Shift lever
1. Pull out.
2. Slide to “FWD” (forward).
3. Release.
1
1
2
3
U8HV10E0.book Page 27 Monday, May 16, 2011 1:15 PM