Filter
Top Products
Periodic maintenance and adjustment
104
RST90
RST90PGT
ESU14181
Replacing a headlight bulb
RS90P / RS90PLT
1. Remove the top cover. (See page 63 for
removal procedures.)
2. Remove the screws, and then remove
the headlight access panel.
3. Disconnect the headlight coupler.
4. Remove the bulb holder cover.
5. Unhook the bulb holder, and then remove
the burnt-out bulb.
6. Install a new bulb, and then hook the bulb
holder onto the headlight unit. NOTICE:
Keep oil and your hands away from
1. Grease nipple
1. Grease nipple
1. Screw
1
1
1. Screw
2. Headlight access panel
1. Headlight coupler
2. Bulb holder cover
1. Bulb holder
1
2
U8HV10E0.book Page 104 Monday, May 16, 2011 1:15 PM