Yamaha RST90PGTB Offroad Vehicle User Manual


 
Control functions
24
ate the engine longer than necessary if
there is an error code to avoid possible en-
gine damage.
[ECS00820]
RS90P / RS90PLT / RST90PGT
RST90
ESU10531
Engine stop switch “”
The engine stop switch is used to stop the en-
gine in an emergency. Simply push the stop
switch to stop the engine. To start the engine,
pull the stop switch and proceed with starting
the engine. (See page 48 for engine starting
procedures.)
During the first few rides, practice using the
stop switch so that you can react quickly in an
emergency.
ESU10661
Headlight beam switch
LIGHTS
Push the headlight beam switch to change the
headlight to high beam HI or to low beam
LO.
ESU12654
Grip/thumb warmer adjusting
switch
The grip warmer adjusting switch and the
thumb warmer adjusting switch control the
electrically heated handlebar grips and throt-
tle lever respectively.
1. Warning light “”
2. Engine trouble warning indicator “”
3. Error code display
1. Warning light “”
2. Engine trouble warning indicator “”
3. Error code display
312
1
2
3
1. Engine stop switch “”
1. Headlight beam switch LIGHTS
2. High beam HI
3. Low beam LO
U8HV10E0.book Page 24 Monday, May 16, 2011 1:15 PM